|
WAT 902DM3 DSP Monochrome Security Camera
| Model |
WAT-902DM3 (EIA/CCIR) |
| Pick-up element |
1/3 inch Interline transfer CCD image sensor |
| Number of total pixels |
811(H)×508(V) (EIA); 795(H)×596(V) (CCIR) |
| Number of effective pixels |
768(H)×494(V) (EIA); 752(H)×582(V) (CCIR) |
| Unit cell size |
6.35 μm(H) × 7.4 μm(V) (EIA); 6.5 μm(H) × 6.25 μm(V) (CCIR) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, Vp-p, 75ohm Unbalanced |
| Resolution (Horizontal) |
570TV lines (Center) |
| Minimum illumination |
0.002 lx. F1.4 (AGC HI) |
| Gamma correction |
g @ 0.45, g @ 1.0 (Switchable with internal switch) |
| AGC |
HI : 8 40dB, LO : 8 ~ 22dB |
| S/N Ratio |
52dB (AGC OFF = 8dB, g = 1.0) |
| AE Mode |
OFF : 1/60 (EIA), 1/50 (CCIR), FL : 1/100(EIA), 1/120 (CCIR)
EI : 1/60 ~ 1/100000sec. (EIA), 1/50 ~ 1/100000sec. (CCIR) |
| Lens mount |
CS-mount |
| Installation screw |
U 1/4 inch (D=5mm) (Top/Bottom) |
| Connection terminal |
Video out(BNC), Power, Auto iris (Video/DC auto, selection) |
| Power supply |
DC +9.0 - 15.0V |
| Current |
max. 120mA |
| Operating temperature |
-10°C ~ +40°C (w/o condensation) |
| Storage temperature |
-30°C ~ +70°C (w/o condensation) |
| Dimensions |
35.5(W) x 36.0(H) x 64.0(L) mm |
| Auto Iris |
Video/DC (Auto switch) |
| Weight |
Approx. 90g |
| Accessories |
DC-Plug(WPDC12), Iris-plug(AIC-G), Hex wrench |
|
